Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Irving
Garage door installation in Irving runs $700-$2,200 for a standard new door, with opener installation adding $250-$550. We serve every Irving neighborhood, from Las Colinas townhomes to 1960s single-car garages in West Irving, typically within 24-48 hours of your call. Our Garage Door Installation team arrives with a written, flat price agreed before any work starts. Call (469) 460-9039 and you’ll speak with a live person, not a recording.
Why Irving Homeowners Choose Servo Garage Doors
Irving’s housing stock is not forgiving. We get called to Las Colinas townhome complexes where three adjacent units have the same 1987-era torsion spring failing within days of each other. We get called to Valley Ranch patio homes with 7-foot headroom where a standard track kit physically will not fit. We get called to West Irving homes built in the Eisenhower administration with 7-foot-6-inch by 9-foot openings that no big-box door matches. Each of these is a different job, and each requires a technician who has done it before in Irving, not someone driving in cold for a Garage Door Repair - Irving call.
Marcus Deller, who leads our team, has built the company around one practice that eliminates the typical contractor anxiety: the customer sees the failed part before anyone quotes a replacement. That rule, Clause 4 of The Haven Standard, means the technician photographs the worn bearing plate, the split spring coil, the racked track, and the homeowner sees exactly what is wrong before agreeing to the fix. Every installation closes with the same photo record showing what was installed and how it sits in the opening. No trust fall required. No “just take my word for it.” A paper trail. That is the company.
We answer the phone around the clock. If your spring breaks at 2 a.m. in a Las Colinas townhome and the car is trapped in the garage, you reach a human being who dispatches a named technician with an on-the-way text. Not a callback window. Not a voicemail. A named tech and a live ETA.
Our Garage Door Installation Services in Irving
New Door Installation
A full door replacement in Irving runs $700-$2,200 depending on size, material, insulation, and windshield requirements. In Las Colinas and Valley Ranch, where attached townhome garages open onto alleys and narrow streets, we frequently install doors with reinforced struts to handle the same straight-line thunderstorm winds that roll across Irving’s flat, open terrain with nothing to slow them down. Every new door comes with a written scope and a flat price before the old one comes off the tracks.
Single Car Door
West Irving and South Irving homes from the 1950s through 1970s commonly have single-car openings that are narrower than today’s standard 8-foot door. A homeowner who orders a standard 8×7 online gets a door that will not fit. We measure the actual opening, confirm the exact door size, and quote a door that installs correctly the first time. For these older garages, low headroom is common, and we carry the low-headroom hardware kits on the truck so we do not have to schedule a second visit.
Double Car Door
Double-car doors in Irving run $1,000-$2,200 installed. Most of the double doors we install in Valley Ranch and Las Colinas are 16-foot steel doors with at least an R-13 insulated core, because these garages are attached to living space and Irving summers push attic-adjacent garage temperatures past 120°F. An insulated door lowers the temperature delta and reduces the load on the opener. We carry Clopay and Amarr double doors in stock for faster turnaround in Irving.
Custom Garage Door
Some Irving garages do not fit any standard size. Our Garage Door Installation team handles custom-width and custom-height doors, including the narrow single-car openings in West Irving and the slightly oversized carriage-house doors in older Las Colinas custom builds. Custom doors take longer to fabricate, usually two to four weeks, but the process starts the same way: a free measure, a written quoted price, and a signed scope before anything is ordered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Work With in Irving
We install and service doors from Clopay, Amarr, and Wayne Dalton, plus openers from LiftMaster, Chamberlain, and Genie. For Irving homeowners, stocking decisions matter. We keep the most common rollers, hinges, torsion springs, and opener parts on the truck so a spring replacement in Valley Ranch does not require a parts run across Dallas. If you already have a brand preference, tell us when you call. If you do not, we’ll recommend based on the door’s exposure, the garage’s attachment to living space, and the wind load on your specific Irving lot.
Common Garage Door Installation Problems We See in Irving Homes
- Synchronized torsion spring failures in Las Colinas townhomes. Thousands of attached townhome and villa garages in Las Colinas were built in the 1980s, which means their original torsion springs are now reaching the end of their 10,000-cycle lifespan at roughly the same time. We’ve replaced the same spring on three adjacent units in a single week.
- Dallas Black clay heave racking door frames out of square. Irving sits on the same expansive clay formation that shifts seasonally across the Metroplex. In Las Colinas and Valley Ranch, this movement racks garage door frames a quarter-inch or more, causing doors that bind on one side or will not close flush. The fix is track re-squaring, not a limit-switch adjustment.
- Non-standard openings in pre-1970 West Irving garages. Single-car garages from the 1950s and 1960s often measure 7-foot-6-inch by 9-foot or smaller, with low headroom and narrow side clearances. Standard doors do not fit, and installing one anyway leads to a door that binds, sags, and fails early.
- Weather stripping and bottom seal failures from thermal swings. Irving sees summer highs over 100°F and hard freeze events like February 2021’s sub-zero stretch. Rubber bottom seals and PVC weather stripping crack and fail seasonally. We replace these as part of most door installations, and we quote them as a line item so the price is transparent.
Pricing for Garage Door Installation in Irving, TX
Here are the ranges we actually quote in Irving. These are flat, written prices agreed before any work begins, per Clause 1 of The Haven Standard. No “call for a quote.” The price is on the page.
| Service | Irving Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Track Realignment | $120-$240 |
| Opener Installation | $250-$550 |
What moves a door within that range: size (single vs. double), material (steel vs. wood), insulation R-value, wind-load reinforcement, and whether the existing track and hardware can be reused. We do not quote a low number and then pad the invoice after the fact. The written scope covers what we are doing, and the price covers that scope. If we find something unexpected during the install, we photograph it, explain it, and get your approval on the change order before proceeding. Every job ends with the documented photo record, included at no extra charge.
We Also Serve Cities Near Irving
Irving is our focus on this page, but our crews regularly install doors in Garage Door Installation in Irving‘s neighboring cities, including Dallas, Mesquite, Grand Prairie, and Richardson. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, with technicians serving Irving locally. If you’re in a nearby city, you’ll get the same written-price-first process.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Irving
Probably, yes. Most 1980s Las Colinas townhome garages have 7-foot or lower headroom, which is too tight for a standard torsion spring and track assembly. A low-headroom kit repositions the tracks and uses a different spring mounting configuration to make a full-size door fit under a low ceiling. In a Valley Ranch patio-home complex, we replaced a 1989 Wayne Dalton door with tight 7-foot headroom using a low-headroom track kit and a LiftMaster 84504R with rolling-code security. The original end bearing plates were so worn from 35 years of spring cycles that the new torsion assembly required re-drilling the mounting pads, and we re-squared the tracks after Dallas Black clay heave had shifted the frame a quarter-inch on the left side. That is a typical Las Colinas job. Call (469) 460-9039 and we’ll measure your opening before anything else happens.
Extreme cold makes torsion spring steel more brittle, and Irving’s sub-zero stretch in February 2021 pushed thousands of already-fatigued springs past their breaking point. Springs that were near the end of their 10,000-cycle lifespan, especially in 1980s and 1990s townhome and patio-home garages across Irving, failed in waves during and after that freeze. The cold did not cause the wear; it accelerated the final failure. Spring repair in Irving runs $180-$340, and we stock the common spring sizes on the truck.
For an attached garage with living space above or beside it, R-13 or higher is the practical minimum in Irving. Garage temperatures here regularly exceed 120°F in summer, and an insulated door lowers that delta measurably. R-13 is standard for steel doors we install through Amarr and Clopay. If the garage is detached and you do not condition the space, R-6 to R-9 is sufficient. The cost difference is usually $150-$400 on a typical Irving installation, and it pays back in lower cooling loads for any adjacent rooms.
Usually not. In Irving, a door that binds on one side is more often a track or frame problem than an opener problem. The Dallas Black clay beneath Las Colinas and Valley Ranch heaves seasonally, and that movement can rack the garage door frame out of square, causing the tracks to pinch the rollers on one side. The fix is track re-squaring and sometimes re-shimming the frame, which runs $120-$240. We inspect the opener as part of that diagnostic, but we do not sell an opener replacement when the track is the problem. The photo record shows you exactly what we found.
Yes. Many West Irving single-car garages from the 1950s and 1960s have openings that are narrower and lower than modern standard sizes. We measure the actual width, height, and side clearances, then order a door that fits the opening. Custom doors take longer, usually two to four weeks, but the alternative is a standard door that binds, sags, and wears out prematurely. This is one of the most common requests we get from Irving homeowners who bought a house built before 1970 and discovered the hard way that modern doors do not fit older openings.
Call Servo Garage Doors Dallas for Installation in Irving
If you need a new garage door in Irving, call (469) 460-9039. You will get a live person, a free estimate, and a written price before any work starts. Marcus Deller and our Irving-based technicians carry the common parts on the truck, so most installations are completed the same day or next day. Every job closes with your documented photo record, tracing back to the rule Servo was built on in 2015: show the customer the evidence. That is the whole system.
Written by Marcus Deller, Owner at Servo Garage Doors Dallas, serving Irving and the surrounding area. Independently owned and operated under The Haven Standard.